ECHO MARINE 1200-PRO- 3 Spezifikationen

PRO SERIES SEMI MODULAR BULKHEAD MOUNT UNIT 115V / 60HZ - 230V / 60HZ 500-PRO-1 / 900-PRO- 2 1200-PRO- 3 / 1500-PRO- 4 OWNERS MANUAL P

MAINTENANCE TIMETABLE The following maintenance timetable is an estimate of the time intervals at which maintenance may be required only. This

MEMBRANE CHANGING PROCEDURE PRESSURE VESSEL END PLUG CHANGING PROCEDURE 1) Remove the product port (if installed) and the high pressure fitting. 2

110/220V24VTOHIGHPRESSUREPUMPTOLOWPRESSUREPUMPMOTORSTARTERR1MOTORSTARTERR2TRANS-FORMERSTARTSWITCHS1PUSHBUTTONNOSELECTORSWITCHS23-POSITION,MA

HIGH PRESSURE PUMP SYSTEM TROUBLESHOOTING GUIDE MALFUNCTION CAUSE REMEDY The pressure Worn packing seals Replace seals dro

ECHOTec. Watermakers High Pressure Pump ET-WM316T PARTS LIST ITEM PART NO. DESCRIPTION KIT NO. QTY.

ECH2O TEC. WATERMAKER LIMITED WARRANTY Echo Marine Ltd. warrants to the original purchaser for a period of twenty-four (24) months from the date

The ECHO Tec. Membrane Element is guaranteed to be cleanable for a minimum of one year from date of shipment, or commissioning of the system by Echo M

INTRODUCTION Thank you for choosing an ECHO Tec. reverse osmosis desalination system. We trust that you will be completely satisfied with our produ

SPECIFICATIONS Rated Performance: ECHO Tec: 500 – PRO – 1 20 gallons – 75ltr. / hour 900 – PRO – 2 38 gallons – 140ltr. / hour 1200

STANDARD SYSTEM FEATURES 1) 1 High-pressure pump unit with controls 2) Pressure vessel rack with reverse osmosis membrane vessel(s) ECH2O T

INSTALLATION INSTRUCTIONS HIGH PRESSURE PUMP UNIT Mount the high pressure pump unit in a cool and dry location using all five mounting holes.

PRE-FILTER ASSEMBLY Mount the pre-filter in a serviceable location and connect the intake port to the outlet of the raw water feed pump or multi-

SYSTEM OPERATION INSTRUCTIONS The reverse osmosis membrane contains a preservative solution to prevent microbiological growth. If ingested

FRESH WATER FLUSH PROCEDURE Caution: The fresh water pressure should not exceed the range of the low pressure gauge/s. The installation of a pres

MEMBRANE CLEANING PROCEDURE The membranes of the ECHO Tec. Watermaker must be chemically cleaned when the product water output drops